Discussões de Computer Aided Engineering (Cae) Software

Working on assemblies and parts at the same time often requires switching back and forth between the tabs. Almost every workstation today uses multiple monitors - it would make things a lot easier if Fusion 360 would support multi monitor or at least split screen display of different screens.

Because this disabled feature limits the thought process and new method which can be evolved.

Its the easy way to draw the mechanical parts

for example, consider I have a project fully written in "Matlab", and I want to convert it to "Scilab", is there a way to do? while keeping the correctness of the code.

how can i get information for what is scilab can do to what kind of engineering problems that i can solve by using scilab and where i can get the tutorial or guidebook

After the production of the motor prototype and measuring the performance, Motor-CAD thermal model has to be recalibrated. This can be done manually, but I wonder if someone has a code example of automated calibration?

If Autodesk partners with brands and keep an updated database, engineers' and architects' jobs would be so much easier.

As an advance user, I would like to use some models from ASCET/ ETAS and vehicle model from CARSIM and execute them on different RTPC on same simulation time.

instead of calligraphs have better methods to know about overall runtime and space and suggest the place and what would be the fix for the bottlenecks.

In my work, i come across a lots of simulation. Usually i do batch run of 10-20 simulation. so post-processing is very difficult for me. I am recording the results manually by checking each parameters which is very boring, time-consuming. chance of human error is very high. so it will be very... Leia mais

Is there a way to get certofocations?

I need the guide how to do simulation of dynamic mooring analysis

N

jhgjhg

Interfacing with other programming languages would help me to quickly analyze the simulation daata

Is online course on cards?

I think PLECS should reach out to industries like European Spallation Source, and Princeton Plasma Physics Lab, and other research labs, and demonstrate to the group of engineers here the usability of this software. It will have a wider impact and it will help us procure a license for the... Leia mais

If we want to scale the model it was sometimes difficult because the model went through the floor or the program crashed.

Its regarding handbook where basics to advanced courses are covered.

There are many situation where simulink gives some error but some are very generic wherein we can't understand where the error is.

Actually, I am looking for future plans so that I can recommend this tool to my current organization. we are currently looking for such a tool for our problems.

The fill pressure issue is that it is not even close to what the moulding machine shows. The difference is 10times low

PCB and other chips can only be modelled using cartesian co ordinates inclined models involving two PCB at an angle other than parallel or perpendicular cannot be simulated in PCB the usual way

Need boundary conditions and governing equation

Is Scilab better than Matlab?

The question is about the future of scilab where in people can tend to expect for a variety of features which may be part of other tools suite currently available in the market or new features to be embedded in their future usage.

Simscale is making their progress by covering all kinds of basic knowledge for beginners

I work on project on modeling and simulation of PMLM using FEM based on ANSYS Maxwell software

wrap option has limitations, it will not clean up wall. Tool does not move on Y axis (indexer on right side on table ) during wrap motion.

See page 1

On right clicking a body (not a component) in the tree, can you add an option to export it, not only as STL, but also as STEP or IGES? Now we can only do that for a component, and if you only want ONE body inside this component, you have to toggle OFF every other bodies... and if you have... Leia mais

Looking for software to run in an editor such as visual studio code to up load and down load programs haas lathe & mill.

I would like FDM toolpath creation in Fusion so that we can slice solid models directly, instead of using meshes. This way we could use true curves. Also, I would like the ability to adjust the resolution of the toolpaths precisely, to match the resolution to the capabilities of the machine.

Everything going to the laser cutter needs an extra step in Illustrator to ungroup the DXF that Fusion generates.

Currently 2D drawing creation are a limitation for me. I am starting to bend in sheet metal and am finding limitations with that as well. How do you decide what to work on and how long do improvements take? I see currently (2/20/20 cool date btw) the electronics module is where all the... Leia mais

As a company Central Scanning provide a 3D scanning, CAD and 3D printing service to their customers. My colleagues tend to use programs like Design X to take a 3D scanned mesh and turn it into CAD. Fusion has some rudimentary tools to accomplish this but ultimately if there is something complex... Leia mais

?

?

?

?

?

When two waveforms are generated from two equivalent simulation models, with different time bases, what is the process which can be taken to compare the two waveforms for accuracy?

Plant simulation related..also some robotics application motion part movement simulation can we do?

Me gustaría tener conocimientos mas amplios de la herramienta, aunque tengo dos años usándola, estoy interesada en realizar el curso.

Now, we are using academic license to use MATLAB.

When I use sketches to constrain assemblies, that’s great. I known synchronous doesn’t work that way, so What would the equivalent be for producing an assembly, so that when I change a part, everything else reacts to that change and moves accordingly.